Introductory Offer$915.00CA$1,310.74Shop the bundle
Forklifts

Forklift access control: the truck starts only for a trained operator.

Forklift access control replaces the key with something each operator holds: a code, a card or a fob. The SM301 does that, and asks the daily safety check before the truck will start. It is $865.00CA$1,239.11 a truck, with no monthly fee.

Ways to control who drives

Every forklift has some kind of control over who starts it, even if it is only a key on a hook. What differs is how hard it is to get around, whether it knows who drove, and whether it does anything about the daily check.

01

The key

Whoever holds the key can start the truck. Keys are copied, shared, and left in the truck at the end of a shift.

Nothing says who drove, and nothing asks for the daily check.

02

A code‑only keypad

Each operator gets a 4-digit code in place of the key, and a code can be removed when someone leaves.

Codes are easily passed around, and a keypad on its own does nothing about the daily check.

03

A card or fob reader

The truck starts for a card or fob, often the same one that opens the building. A card is harder to share than a code.

A reader on its own records nothing about the condition of the truck.

04

The SM301

Each operator gets a 4-digit code, a 125 kHz card or fob, or both, and at the start of each shift the daily check is asked on its screen first.

Every check is kept in the web portal with the operator’s name, and the unit shows who drove last.

What each of these costs, with real prices, is on what forklift access control costs.

What the guidelines ask for

29 CFR 1910.178

OSHA’s forklift guidelines do not ask for access control by name. They ask that only trained operators drive, that trucks are not left where anyone can start them, and that every truck is checked before it is used. Access control is how you make sure of all three on every shift, not only on the day of an inspection.

1910.178(l)(1)(ii)

Trained before they drive

Except while being trained, nobody operates a forklift until they have completed the training and evaluation OSHA’s guidelines describe.

With Start-Manager

The truck starts only for a code or card you have issued. Someone who has not been trained has neither.

1910.178(l)(4)

Retrained and re-evaluated

An operator is evaluated at least once every three years, and retrained after an accident or near miss, unsafe driving, or a move to a different type of truck.

With Start-Manager

The web portal holds each operator’s training expiry and sends an email two weeks before it runs out. A code is removed for one truck or for all of them.

1910.178(m)(5)(i)

Left unattended

A truck left unattended has its forks fully lowered, its controls in neutral, its power shut off and its brakes set.

With Start-Manager

There is no key to leave in the truck. The stop button shuts it off, and only a code or card starts it again.

1910.178(q)(7) and (p)(1)

The daily examination

Every truck is examined before it is placed in service, at least daily, and after each shift where trucks run around the clock. An unsafe truck is taken out of service until it is repaired.

With Start-Manager

The SM301 asks the questions before the truck will start. A failed answer can keep it locked until a supervisor releases it.

Read the guidelines themselves at osha.gov, 29 CFR 1910.178 . The paragraphs above are summarized from the guidelines as they read on 1 November 2026. Guidelines outside the United States differ.

On the truck

A code or a card to start it. Twelve questions before it moves.

The SM301 is a stainless steel keypad and card reader with its own screen, wired in place of the key. The forklift stays off until an operator it knows signs in, and at the start of a shift it asks the inspection questions before the truck will start. Each answer is kept in the web portal with the operator’s name.

If a question fails, the truck can stay locked until a supervisor releases it, or the failure can simply be recorded: you choose. To see how operators drive as well as who, the impact module ($440.00CA$630.30) records bumps on three axes and shows each one to the operator.

See the SM301
The standard forklift questions
  1. 01Fluid leaks: brake fluid, hydraulic oil, engine oil, transmission fluid
  2. 02Fluid levels
  3. 03Lifting device: carriage, channels, chain and pulleys
  4. 04Tires: chunking, cracks, flat spots, pressure, wear
  5. 05Visible damage: overhead guard, counterweight, load backrest, lights, back-up alarm, seat
  6. 06Safety devices: back-up alarm, strobes, warning lights, seat belt, grab bars, steps
  7. 07Forks and attachments: cracks, bends, wear
  8. 08Capacity plate legible and correct, including with attachments
  9. 09Gauges and dashboard warning lights working
  10. 10Brakes: service brake and parking brake
  11. 11Lift, tilt, drive and steering controls working
  12. 12Safe to operate for your shift
Make the check your own

Change any of these questions or add your own in the web portal, for one truck or a whole group, so the check asks what matters on your site.

This is the engine forklift set; electric forklifts have their own, which asks about the battery. Each one is answered pass or fail on the unit, in random order.

What it costs for a forklift

Published prices

One SM301 for each truck, bought once. It controls who drives, does the daily check on the truck and keeps a record of it.

Access control, the daily check and records

SM301

$865.00CA$1,239.11
  • A 4-digit code, a 125 kHz card or fob, or both, in place of the key

  • The 12 forklift questions, or your own

  • A lockout after a failed check, until a supervisor releases it

  • Every check in the web portal with the operator’s name

  • Training expiry in the portal, with an email two weeks before

  • Last operator search after an accident

See the SM301
NO monthly fees

To try the SM301 on one forklift, the Introductory Offer is $915.00CA$1,310.74 with the mounting bracket, four key fobs and a year of unlimited report storage.

See the Introductory Offer

Pricing is in US dollars.Prices in Canadian dollars are estimates; orders are charged in US dollars. Does not include freight, taxes, duty or installation. Full price includes cost of hardware, licensing fees, full use of US based web portal (smPortal) & tools (smConsole, smHealth, etc.)

What to know before you buy

Tell us about the trucks

Send the make, the model, the age and the battery or system voltage of each truck. The SM301 runs on 12 to 48 volts DC and is usually wired into the key switch harness, replacing the key, on engine and electric forklifts alike. On engines that need glow plugs or a slow cold start, it can power the existing key switch instead.

Your own cards

If your building already has card access, the best way is for operators to use the card they already carry. The SM301 reads about 85% of the open-format 125 kHz cards and fobs on the market, such as HID 26-bit (H10301) and 37-bit (H10302) and EM4100. Proprietary cards cannot be read, so ask us if you are not sure which yours are. Two key fobs come with each unit.

Wi-Fi

The SM301 uses your own 2.4 GHz Wi-Fi to reach the web portal. It does not have to be connected all the time: it keeps every check until it is back in range.

What it is not

The SM301 decides who can start the truck and records the daily check. It does not limit speed or detect people in the aisle.

Questions about forklift access control

Does OSHA require forklift access control?

Not by name. OSHA’s forklift guidelines, 29 CFR 1910.178, ask that nobody operates a truck until they are trained and evaluated, and that every truck is examined at least daily. Access control is a way of making sure of both on every shift: the truck starts only for someone you have issued a code or card, and only after the check.

Can operators share a code?

A code can be told to someone else; a card has to be handed over. The SM301 is a keypad and a card reader in one, and each operator can be given a code, a card or fob, or both. Where sharing is a worry, a card is harder to pass around, and if your building already uses cards, operators can use the ones they carry. Either way, every check is recorded in the web portal under the name the code or card belongs to.

Does it work on electric and engine forklifts?

Yes. It runs on 12 to 48 volts DC and is usually wired in place of the key switch on both. Each has its own standard question set; the electric forklift set asks about the battery. The same unit goes on pallet trucks, scissor lifts, utility vehicles, stationary machinery and overhead cranes, all reporting to one web portal.

We have older forklifts. Will it work?

Yes, with a little more care. Older trucks can be harder on electronics, with less filtering and protection, so added surge protection may be recommended. Where the battery is weak, the SM-Cap1 super capacitor ($175.00CA$250.69) keeps the unit on clean, steady power. On an outdoor diesel truck with glow plugs, the SM301 is wired in line with the key switch rather than replacing it: it powers the key switch once a valid code or card is entered and no safety check is due, so the glow plugs and a slow start work as they always have.

How do we find out who was driving?

The SM301’s last operator search shows who started the truck last, which is the first question after an accident or damage. The web portal keeps every check with the operator’s name.

Can it shut off a truck that is left running?

Add the SMTR100 Seat Timer ($155.00CA$222.04). It shuts the truck off a set time after the operator leaves the seat, so a truck is not left running unattended.

How many operators can one truck have?

The SM301 holds up to 1,000 codes and cards combined, and the web portal has no limit on operators. Codes are added and removed in the portal, for one truck or a group.

Who installs it?

Start-Manager does not install units. Your own maintenance department or a contractor does it, and we send installation documents after the order and give technical support for the installation.

Is there a monthly fee?

No. smPortal, smConsole and smHealth have no fees with the purchase of an SM301. SM301 report data is kept for 3 months; unlimited storage for the life of the unit is a one-time $125.00CA$179.06. The one thing with a monthly fee is smIntegration, the optional link to your own software, and sales quotes that.

Tell us about your forklifts.

Call us 1-800-674-9320, send the make, model and voltage of each truck, or see the system in an online demo.